What are the common problems in the application of IC gas meters?
Release time:
2025-07-17
Now gas meters have been applied widely, but some problems inevitably appear during use.
Counting discrepancy/no counting: Gear and micro switch aging or incorrect position; 2. Reed tube failure, resulting in more or less counting or even not counting of the electronic device.
Normally open valve: 1. Low battery power; 2. Reed tube failure caused by its quality or vibration, so that the electromechanical valve can not work.
Normally open valve (no gas, meter blockage): 1. The card is improperly inserted; 2. Meter failure; low battery power;
Long beep: Buzzer damaged
No buzzer: Buzzer short circuit
No card reading: 1. Cardholder oxidation, data line open circuit; 2. Low battery power.
Air leakage (internal leakage, external leakage): 1. Internal leakage: the airtightness of the electromechanical valve when it is closed is called internal leakage. Causes: the valve mouth and the valve cover is not closed tightly, such as burrs or flatness super poor, the valve cover and the valve mouth misalignment or half-open state. 2. External leakage: the air tightness of an electromechanical valve when it is opened is called external leakage. Causes: electromechanical valve push rod and seal ring sealing is not tight; gas gun and valve body connection is not tight; valve body and through and base table connection sealing is not tight.
Zhengzhou Anran I&C Technology Co., Ltd.
Tel: 0086-371-68629564
E-mail: anran@zzanran.com
Address: The National University Science Park, No.11, Changchun Road, High & New Technology Development District, Zhengzhou City, Henan Province, China
Copyright © Zhengzhou Anran I&C Technology Co., Ltd.
Powered by :www.300.cn Supported IPV6 Privacy Policy